AirSep Freestyle Operations Instructions download pdf (Page 26)

MN123-1 rev E 11/12

Caution:

When using FreeStyle with the universal power supply in an automobile, boat, or other motor vehicle, make sure that

the vehicle is started and running before turning on and operating the FreeStyle unit. If the power supply indicator light does not

illuminate and requires resetting, disconnect the power supply from the motor vehicle’s DC outlet, restart your vehicle, and then

reconnect your power supply into the DC outlet.

1. Make sure your power supply is securely connected to the FreeStyle inlet, as shown in Figure 14.

2. Connect the proper DC power cord end to the inlet marked ACCESSORY DC IN on the power supply, as shown

in Figure 17.

3. Turn on your motor vehicle.

4. Connect the DC power cord to the motor vehicle’s DC outlet, as shown in Figure 18.

5. To operate the POC, press the FreeStyle [1], [2], or [3] setting on the unit’s top panel, as determined by your

prescription. To turn the unit off, press the setting associated with the LED illuminated above it.

Figure 17 Figure 18

Use with Airline Power at Passenger SeatFigure 2

(wit h 4-pin connection configurations)

AirSep’s FAA-approved FreeStyle enables you to use this POC in-flight on most commercial airlines around the

world. Each airline establishes its own policy for FAA-approved POC use, as well as the requirements for, and

the availability of, optionally allowing you to power your unit onboard the aircraft. Aircraft-equipped passenger

power may include one or more of the following sources: an AC power outlet, a DC power outlet similar to that

typically found in an automobile, or a DC power outlet with a 4-pin configuration.

Use with AirLine Power at Passenger seat (with 4 pin connection configuration

Use with DC Power (Automobile, Motorboat etc..)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

No comments

AirSep Freestyle Operations Instructions Page 26