AirSep Freestyle Operations Instructions download pdf (Page 17)

MN123-1 rev E 11/12

Before operating FreeStyle for the first time, familiarize yourself with the major components. These are illustrated in the figures

on the following pages and discussed later in the manual.

Battery Charging

Check to make sure your unit’s battery is fully charged before venturing out with FreeStyle for the first time or upon subsequent

use. To check the level of charge of the internal battery, press the BATT button on FreeStyle’s keypad. The battery

gauge/indicator(s) LEDs above the BATT button illuminate to indicate the level of internal battery charge (25-100%). Note: The

internal battery is charging whenever the unit is operating on AC or DC power. To charge FreeStyle’s internal battery, simply

connect its Universal AC/DC power supply into the unit’s power connection inlet (as shown in Figure 7). Be certain to first

properly align the power cord to this inlet. To do this, take note of the “D”-shaped plug of both the power cord connector and

the FreeStyle’s inlet connection. These must be properly aligned and when removing the power cord, the release button must be

pressed to remove it from the FreeStyle unit. This ensures that neither the unit nor the power accessories are damaged.

Optional AirBelt

The optional AirBelt, which can increase FreeStyle’s total battery duration up to 10 hours, requires approximately 3 hours to

completely charge when the external battery is fully depleted. To recharge AirBelt, connect its own AC power supply to the end

of AirBelt’s power cord (as shown in Figure 8), and the other end of the power supply into a proper AC power outlet. A separate

battery gauge/indicator for checking the level of charge on the AirBelt’s battery is located on this accessory’s cord and functions

exactly like the internal battery’s indicator on the keypad.

Depending upon the temperature of the FreeStyle battery, it can take several minutes for the charging cycle to start after

connecting to power. This is a normal condition and is intended for safe charging.

The FreeStyle battery does not need to be fully discharged before recharging. It is recommended to charge the FreeStyle

battery after each use.

FreeStyle unit’s

Power Inlet

Press to remove

power cord.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

No comments

AirSep Freestyle Operations Instructions Page 17